Water Jet Cutting machine
Video1(glass cutting)
.....Video2(stainless steel cutting) ....Video3(harden steel ) ....AutoCAD picture: long: 
| "WaterJet" Technical Specification: |
| Model APW-1515 BA APW-1520 BA APW-1525 BA APW-1530 BA APW-3060
BA Max.Work Piece Size: 1.5m x 1.5m 1.5m x 2m 1.5m x 2.5m 1.5m x 3m 3m x 6m Max.Z-axis adjustment: 150mm NC System Servo Motor Position Accuracy: ± 0.01mm Cutting Accuracy: ± 0.1mm Max.Working pressure: 380mpa (55,000psi) Max.Pressured Water Flow Rate: 3.7L/min Number of axis: 3 axis Power Supply: 380V / 415V / 50Hz / 3 phase Intensifier: Made in America Servo Motor: Made in Japan Ball Screw: Made in Taiwan Optional Item: 1) 5 axis Control. 2) Two Cutting heads. 3) WaterJet Cutting under water. |
Advantage of "WaterJet" Cutting Machine:
1) Able to cut thicker material. 2) able to cut non-ferrous material. 3) Produce good finishing and acceptable accuracy. 4) Produce no heat affected zone. 5) Able cut smaller hole diameter of thicker material. 6) Fast set-up and cutting speed. 7) Low cost investment as compared to Laser Cutting Machine. 8) Environment friendly. 9) Type of materials cut by WaterJet Machine: Stainless Steel, Aluminium, Titanium, Tool Steel, Brass, Shim Material, Laminates, Kevlar, Polypropylene, Nylon, Rubber, Acrylic, Foam, Gasket Paper, Filter Paper, Carbon Fibre, Granite, Marble, Ceramic, Clay & Porcelain Tiles, Glass, Wood & Wood Composites, Composite Materials. |
